To upgrade the firmware properly, follow the steps carefully:


  1.Power the camera off.

  2.Remove the MicroSD card from the camera.

  3.Reformat the MicroSD card using the FAT32 file format on your computer. This is a must, the camera won't update if you don't format the card under FAT32.

  4.Copy the attached firmware 'bin' file into the memory card, please keep the firmware 'bin' file's name.

  5.Reinsert the SD card to your camera.

  6.Connect the camera to the wall charger, the camera will be upgraded automatically. If your battery was full, you do     not need to connect the camera with charger.

  7.After the firmware update was completed, please delete the 'bin' file, otherwise, the camera will install the firmware every time you turn it on

 

Hope this helps!



20210730

V00.00.05

1. Add loop shooting function (video loop coverage and photo loop coverage)


20221211

V00.00.06

1. In the video and photo watermark, add the icon prompt of whether to turn on the light or not

2. Solve the problem that in the SETUP mode, start recording by pressing the button, and the lights do not turn on in the dark environment