To upgrade the firmware properly, follow the steps carefully:


  1.Power the camera off.

  2.Remove the MicroSD card from the camera.

  3.Reformat the MicroSD card using the FAT32 file format on your computer. This is a must, the camera won't update if you don't format the card under FAT32.

  4.Copy the attached firmware 'bin' file into the memory card, please keep the firmware 'bin' file's name.

  5.Reinsert the SD card to your camera.

  6.Connect the camera to the wall charger, the camera will be upgraded automatically. If your battery was full, you do     not need to connect the camera with charger.

  7.After the firmware update was completed, please delete the 'bin' file, otherwise, the camera will install the firmware every time you turn it on

 

Hope this helps!


2021.07.02

V1.1.5

1. Modify the aperture value

2. Update IQ


2021.07.26

V1.1.7

1. Add the function of deleting files in the playback interface


2021.11.01

V1.1.9

1. Compatible with old and new versions of gyroscopes

2. Update IQ effect

3. Modify the video segmentation one second problem


2021.11.26

V1.2.0

1. Adjust the UI occlusion problem of the new screen


2021.11.29

V1.2.1

1. Correct the anti-shake effect


2021.12.18

V1.2.2

1. Modify the abnormal problem of remote control pairing


2021.12.27

V1.2.3

1. Add motion detection and fisheye correction functions

2. Modify the problem that the screen will flicker when the playback delete menu is closed


2021.12.31

V1.2.4

1. Modify to support exfat card format


2022.01.06

V1.2.5

1. Modify the UI aging abnormal problem