SJ8 AIR FIRMWARE ver 1.0.0

May 2018

Download the zipped firmware attachment at the bottom.

For additional information or feedback, please join the community forums discussions.


1. Download attached firmware file below, and extract it to a folder on your computer.

2. Copy and paste the contents to your memory card.
    Best that you format your memory card first.

3. Make sure you have more than 50% power on your battery, then turn your camera on.

4. Your camera will blink slowly several times, then it will blink rapidly. 

    This will take about 2-3 minutes. Once the SJCAM logo appears, the update process is complete.

5. Check that the firmware is updated by going to General Settings> Version.
6. Format the card directly from the camera to remove the installation file (SJCAMA.bin).
    CAUTION: Formatting your card will delete all its contents.
    If you have files on the card that you have not saved elsewhere, you may use a card reader to manually remove the installation file.
    If the firmware installer file is left on the card, your camera will keep installing the firmware each time you power it on.


For error reporting regarding the firmware, you may email