This is the latest Firmware Update for the SJ6 Legend AIR.





Follow these steps to install the new firmware v1.2.7:

1. Extract the memory card from your camera.

2. Format the memory card to FAT32 in your computer. NOTE: If the card is nor formatted to FAT32 the update may not happen.

3. Go to the bottom of this page, look for the firmware file, then download and save it to your computer.

4. Unzip the file to your computer, copy the SJ6CAMD.BIN file to your card, then insert the card back to your camera.
5. Press the power button for 3-5 seconds to initiate installation (make sure you have more than enough power on your battery).

6. Wait for 2-3 minutes for the update to finish, it will show the SJCAM logo when it is finished. Confirm update by going to Main menu, then Version.

IMPORTANT! Delete the firmware update file/s after installing. You can either delete it by formatting the card on the camera, or manually delete the installation file on the card through your computer.



SJ6 Legend AIR FW V1.2.7 Changelog:

1. Adds the functionality to update the camera firmware via the SJCAM Zone app.


SJ6 Legend AIR FW V1.2.5 Changelog:
1. Modify the Polish translation
2. increase the PTZ control function
3. Solve Polish, slow video options display -2x 720p60 should actually be 1080p60
4. Default settings, enter the settings Modify WIFI SSID Click "ok" to add characters and then open the WIFI, or there may be stuck in the WIFI interface
5. After removing the SSID and then click OK to add, the characters are not updated, it should be because the default length is longer than the limit length
6. After entering the SSID for the first time after upgrade shows SJ6000000000 does not match with the actual PTZ means, Adds Gimbal Control Function.


SJ6 Legend AIR FW V1.2.4 Changelog:

1. Fixes bug when connected to HDMI, the touch screen can not operate, so can not enter the playback.

2. Fixes after connecting HDMI, then shutting down, turn off the LOGO displays at 90 degrees

3. Adds wizard quick guide:  Restore the default settings or upgrade and after the first boot, there will be a touch wizard will appear.

4. Adds function: to restore the default settings, return to normal video mode, and prompted to touch the wizard

5. Fixes when in FPV mode and connect HDMI, the unit freezes due to HDMI AV-out not being able to operate at the same time. Now only one video stream output can be selected at time.

6. Adds ISO 3200 manual control

7. Fixes the screen freezing when card becomes full in loop record mode.

8. Optimize the function can not be effective at the same time, the menu to increase the gray background, such as open the gyroscope, FOV and fish eye correction menu becomes gray, then click on the button can not enter the secondary menu or button OK button can not enter the secondary menu

9. In the menu under the two menu, press the power button down options, this time if the slide TP, press the power button down, there will be a disorder problem

10. Set the camera to set the camera mode, the photo set to 12M, and then shut down; and then boot, and then open the wifi, mobile phone camera connected wifi, camera crash

11. Under the Optimize menu, click into the secondary menu and the response speed returned after the second menu selection

12. Optimize the left and right sliding switch mode speed and camera busy tips too frequently to solve the problem, after optimization, the sliding switch mode should be faster than before 2 to 3 times

13. solve the problem: in the camera mode, select the watermark off, take pictures out of the picture will still have watermark information

14. Optimizes Russian translation

15. solve the connection in the HDMI, the next row of a regular UI will flash the problem

16. After opening wifi, made a limit, a camera can only be a mobile phone connection, to prevent too many mobile phone camera connected to the camera WIFI problems

17. Resolve the camera through WIFI start recording, and then click the camera to hide the UI icon, stop recording through APP, click the camera again can not refresh the icon problem

18. Open the fish eye correction function, gray FOV menu

19. Since the white balance menu and the color menu in the menu are red, the white menu is grayed out after the white balance is turned on

20. Modify the translation Delay Capture -> Selfie Timer

21. Resolves slow motion video settings not being saved issue.

22. Resolves the smaller font in the menus after screen was scrolled.

Sept 4 Updates:

23. Resolves when selecting delete in video playback, the video continues to play, and cannot delete file.

24. Fixes issue in burst mode when first image has quality issues.

25. -2X Slow Motion now uses 1080p.

26. Fixes pixellation (noise) when in 2K issue.