Warning: The new firmware of C100+ can only be used on cameras with firmware version 1.2.0 above. C100+ cameras with firmware version below 1.2.0 and 1.2.0 cannot upgrade this firmware

For errors/bug-reporting regarding the firmware, please send a detailed message to us by creating a ticket HERE. 


Follow these steps to install the firmware


1. Use the same Class 10 or higher MicroSD card you use in your C100+ (U3 recommended):


2. Download the attached file below and extract the contents from the zipped file to your computer.


3. Copy the firmware files to your MicroSD card, and make sure you have at least 50% power on your camera's battery.


4. Insert the card into the camera. 


5. Turn the camera on, and the installation process will begin. 




You don't need to do anything, a message will show next that the camera is checking the firmware files and proceed. 



Once done, the camera will soon restart into the new firmware.


The firmware files will automatically be deleted from the card, and you may use your camera immediately.


###########################################

20210327

V1.2.3

1. Solve the problem of small sound, increase the gain, and add the ALC automatic gain function


###########################################

20210417

V1.2.3

1. By default, loop recording is turned on for 3 minutes


###########################################

20210630

V1.2.4

1. Modify the aperture value to 2.7

2. The default encoding method is H264

3. Modify WiFi startup status

   1. Optimize WiFi logic, during the process of connecting to the app to record, connecting or disconnecting WiFi will not interrupt the recording.

   2. After connecting to WiFi and entering the APP to change the shooting mode (such as changing to car, etc.), disconnect the WiFi and exit and then connect to the app to enter the display video mode. The shooting mode problem at the last exit cannot be saved.

   3. Optimize the mode switching logic, set other video modes (such as portrait mode and delayed video mode) and restart the camera to save the mode before shutdown.


###########################################

20210705

V1.2.5

1. Modify the automatic shutdown problem after 3 minutes of video recording