For errors/bug-reporting regarding the firmware, please send a detailed message to us by creating a ticket HERE. 


Follow these steps to install the firmware


1. Use the same Class 10 or higher MicroSD card you use in your C100 (U3 recommended):


2. Download the attached file below and extract the contents from the zipped file to your computer.


3. Copy the firmware files to your MicroSD card, and make sure you have at least 50% power on your camera's battery.


4. Insert the card into the camera. 


5. Turn the camera on, and the installation process will begin. 




You don't need to do anything, a message will show next that the camera is checking the firmware files and proceed. 



Once done, the camera will soon restart into the new firmware.


The firmware files will automatically be deleted from the card, and you may use your camera immediately.




#########################################

20200722

V1.0.9

1. Modify the time-lapse video mode, restore the default settings, and then connect to the app, the display mode on the app is the video mode.

     But the red light on the machine is always on, and the blue and green lights should be on.


#########################################

20200805

V1.1.1

1. Solve the problem that the red light will flash abnormally when the file name in the card is modified and then plugged back into the machine.


###########################################

20200821

V1.1.2

1. Update the IQ effect.


###########################################

20200903

V1.1.3

1. Add anti-shake.


###########################################

20200908

V1.1.4

1. Delete the 2K30 resolution in portrait mode to solve the problem of thumbnail pattern


###########################################

20200914

V1.1.5

1. Anti-shake is turned on by default.


###########################################

20200925

V1.1.6

1. Update the effect and reduce the sharpness


###########################################

20201016

V1.1.7

1. Update the effect and solve the problem of yellowish red face in backlight;

2. Solve the problem of supplementary points


###########################################

20201028

V1.1.8

1. Solve the problem that the green light of WiFi is covered by the red light when it is turned on without a card;


###########################################

20201203

V1.2.0

1. Turn off the WiFi light when connecting WiFi recording;

2. The default 3min automatic shutdown


###########################################

20210327

V1.2.3

1. Solve the problem of small sound, increase the gain, and add the ALC automatic gain function


###########################################

20210417

V1.2.3

1. By default, loop recording is turned on for 3 minutes


###########################################

20210630

V1.2.4

1. Modify the aperture value to 2.7

2. The default encoding method is H264

3. Modify WiFi startup status

  1. Optimize WiFi logic, during the process of connecting to the app to record, connecting or disconnecting WiFi will not interrupt the recording.

  2. After connecting to WiFi and entering the APP to change the shooting mode (such as changing to car, etc.), disconnect the WiFi and exit and then connect to the app to enter the display video mode. The shooting mode problem at the last exit cannot be saved.

  3. Optimize the mode switching logic, set other video modes (such as portrait mode and delayed video mode) and restart the camera to save the mode before shutdown.


###########################################

20210705

V1.2.5

1. Modify the automatic shutdown problem after 3 minutes of video recording