Please find the Firmware file in the attachment


For additional information or feedback, please join the community forums discussions.



Follow these steps to install the new firmware:

1. Use the same Class 10 or higher MicroSD card you use in your SJ10 PRO (U3 recommended):

2. Download the attached file below and extract the contents from the zipped file to your computer.

3. Copy the firmware files to your MicroSD card, and make sure you have at least 50% power on your camera's battery.

4. Insert the card into the camera. 

5. Turn the camera on, and the installation process will begin. 


You don't need to do anything, a message will show next that the camera is checking the firmware files and proceed. 


Once done, the camera will soon restart into the new firmware.

The firmware files will automatically be deleted from the card, and you may use your camera immediately.


You may verify that the new firmware is installed by going to General Settings > Version


***************************************************

***************************************************


For errors/bug-reporting regarding the firmware, please send a detailed message to us by creating a ticket HERE.

############################################## ###########

##############SJ10PRO V1.1.7 Firmware Update Record##############

############################################## ###########


############################################## ###########

2021.01.05

V1.0.8

1. Improve the anti-shake function

2. Modify the recording exception of 720P240.

3. Remove FOV


############################################## ###########


v1.1.1 version:

 Turn on anti-shake, the machine restarts abnormally, can automatically record,

 Turn on anti-shake, adjust P_CHAR through the LUMA value to solve the lack of light

 The noise is large, and the lack of light is solved at the same time, the gain value of SENSOR is large, and the abnormal restart


############################################## ###########

 

2021.01.29

V1.1.2

   Turn on anti-shake, adjust P_CHAR through the LUMA value to solve the lack of light.

   The gear adjustment of luma value, relax the highlighted gear.

   EvLut.Lut.MaxAgcInfo[3].Db120 = 18; this parameter is adjusted to 18



############################################## ###########

   

 

2021.03.20

v1.1.3 version:

   Record video, restart abnormally, repair the previous video, and then

Continue to start recording video.


############################################## ###########



2021.03.22

v1.1.6 version:

   Record video, restart abnormally, repair the previous video, and then

Continue to start recording the video, and delete the video that cannot be repaired.


############################################## ###########


2021.04.27

v1.1.7

Solve live streaming issue