Warning: This version of the firmware is only applicable to cameras with firmware version 1.8 and above. Cameras with firmware below 1.7 cannot upgrade this firmware

To upgrade the firmware properly, follow the steps carefully:

  1.Power the camera off.

  2.Remove the MicroSD card from the camera.

  3.Reformat the MicroSD card using the FAT32 file format on your computer. This is a must, the camera won't update if     you don't format the card under FAT32.

  4.Copy the attached firmware 'bin' file into the memory card, please keep the firmware 'bin' file's name.

  5.Reinsert the SD card to your camera.

  6.Connect the camera to the wall charger, the camera will be upgraded automatically. If your battery was full, you do     not need to connect the camera with charger.

  7.After the firmware update was completed, please delete the 'bin' file, otherwise, the camera will install the          firmware every time you turn it on


Hope this helps!