Please find the Firmware file in the attachment


For additional information or feedback, please join the community forums discussions.



Follow these steps to install the new firmware v1.0.2:

1. Use the same Class 10 or higher MicroSD card you use in your SJ10 PRO (U3 recommended):

2. Download the attached file below and extract the contents from the zipped file to your computer.

3. Copy the firmware files to your MicroSD card, and make sure you have at least 50% power on your camera's battery.

4. Insert the card into the camera. 

5. Turn the camera on, and the installation process will begin. 


You don't need to do anything, a message will show next that the camera is checking the firmware files and proceed. 


Once done, the camera will soon restart into the new firmware.

The firmware files will automatically be deleted from the card, and you may use your camera immediately.


You may verify that the new firmware is installed by going to General Settings > Version


You may also get the SJ10 PRO Official Downloadable Manual from HERE


***************************************************

***************************************************


For errors/bug-reporting regarding the firmware, please send a detailed message to us by creating a ticket HERE.

############################################## ###########

##############SJ10PRO V1.0.2 Firmware Update Record##############

############################################## ###########


2019.12.19

1. Solve the problem that the gyroscope anti-shake on/off switch and the camera touch screen cannot be clicked

2. The encoding method is switched to H264/H265, and the touch screen cannot be clicked.

3. Solve the problem that the language setting cannot be saved when shutting down

4. Solve the problem of video recording in video + camera mode, 5 seconds to zero

5. Solve the problem that the playback menu and page up and down are invalid

6. Solve the problem of clicking on a video in the playback list, it cannot enter the video, and the problem of please wait

7. Solve the problem that the video will automatically start playing when the video is switched from left to right during playback of the video

8. Resolve the replay menu, in the picture list, the picture does not display related number information

9. Solve the problem of inter-recording mode. After 1 second of recording, the camera screen freezes and the touch screen cannot be operated.

10. Solve the problem that the white balance option cannot save the effect when shutting down

11. Under 720P240FPS, there is an error between the actual recording time and the total video display time during playback

12. Solve the problem of distortion correction

13. Solve the problem that the selector switch is grayed out in interval recording mode

14. Solve the problem of stopping the automatic recording operation by clicking the playback menu soon after turning on the vehicle in vehicle mode



############################################## ###########

2020.1.15

1. Solve the problem of split screen when repeatedly switching anti-shake



############################################## ###########

2020.3.5

1. Solve the problem of camera crash after switching to video + camera mode after slow 8X recording, and switching encoding mode

2. Solve the problem of slow recording mode and the problem that the recording cannot be recorded again

3. Solve the problem that sliding down the top position in the menu will break the screen

4. Solve the problem of no response when clicking the screen after pressing the power button to stop recording in the vehicle mode

5. Solve the problem that the ISO3200 picture is gray in the camera mode



############################################## ###########

2020.3.20

1. Solve the problem of black screen and crash after restarting the camera after the automatic recording, high quality, ISO100, date label related settings

2. Solve the problem of not being able to zoom during recording



############################################## ###########

2020.6.8

1. Solve the problem of not taking pictures after switching to the camera mode

2. Solve the problem that the camera screen is stuck after the date label and anti-shake are turned on

3. Solve related problems at 720P240FPS resolution

4. Solve the problem of not being able to record after setting the UI to SJCAM

5. Solve the problem of not being able to record and take pictures after exiting from the live broadcast mode

6. Solve the problem of long time no response when the format option is clicked when the UI is SJCAM

7. Solve the related problems that randomly appear when the anti-shake, rotation, and date labels are turned on at the same time at 720P resolution



############################################## ###########

2020.7.28

1. Optimize the sound

2: Optimize image stabilization

3: H265 Mac system playback problem

4. Solve SD card related issues



############################################## ###########

2020.8.28

V1.0.2

1. Add perspective menu

2. Add the function of adjusting the video sound in the playback video



############################################## ###########

2020.08.31

V1.0.2

1. Solve the problem of sound adjustment function in playback video, in slow recording and interval recording mode