SJ8 PLUS FIRMWARE ver 1.0.5


Download SJ8 PLUS firmware ver1.0.5 in the attachment below


For additional information or feedback, please join the community forums discussions.


Changelog of newest firmware 1.0.5

1. Solve the IQ problems:  the color is too light, the red turn to the red rose and other  issues
2. Solve the problem of the card error of 64G card or 128G card, or non-FAT32 format card  after the machine is formatted.
3. Modify the Gimbal operation procedure. After the adjustment, click for the shutter  function and double click for the switch mode function.



Follow these steps to install the new firmware v1.0.5:

1. Use the same Micro SD card you use in your SJ8 PLUS

2. Download the attached file below and extract the contents from the zipped file to your computer.

3. Copy the firmware file FW96683A.bin to your Micro SD card, and make sure you have at least 50% power on your camera's battery.

4. Insert the card into the camera. 

5. Turn the camera on, and the installation process will begin. 

6. Once done, the camera will restart into the new firmware.

7. Format the card to make sure the installer file does not load each time you power it on.


You may verify that the new firmware is installed by going to General Settings > Version



************************


CHANGELOG TO FOLLOW


************************

For errors/bug-reporting regarding the firmware, you may email support@sjcamhd.com