SJ8 PRO FIRMWARE ver 1.1.0

May 2018



Download SJ8 PRO firmware ver1.1.0 CLICK HERE (Download size: 17MB)



For additional information or feedback, please join the community forums discussions.



Follow these steps to install the new firmware v1.1.0:

1. Use the same MicroSD card you use in your SJ8 PRO

2. Download the zipped firmware file to your computer.

3. Extract the contents of the zipped file. Then copy the firmware files to your MicroSD card.

4. Insert the card into the camera. Make sure you have more than 50% power on your battery.

5. Turn the camera on, and the Installation process will begin. You don't need to do anything, a message will show that the camera is verifying the firmware file and proceed. 


Once done, the camera will restart into the new firmware.


You may verify this by going to General Settings > Version


The firmware files will automatically be deleted from the card, and you may use your camera immediately.



Download SJ8 PRO firmware ver1.1.0 CLICK HERE (Download size: 17MB)


************************

For error reporting regarding the firmware, you may email support@sjcamhd.com


TF